Mogul

Mogul

Allen MogulThe 2-6-0 Mogul is a model of Wabash Railroad's number 573, a fine example of a smoothly performing steam locomotive. There is a wide range of silhouettes and designs the builder may choose from if he wishes to individualize the basic design.

The engine has all the features that constitute a good functional working model. The 8" diameter drivers allow the engine to travel at a good rate of speed without using an excessive amount of steam. The boiler is made from a single 8 5/8" diameter steel tube with a minimum number of joints. The large firebox and grate area promotes free steaming, and the cylinder unit is separated into three pieces for easy machining. The smokebox splits on the centerline for accessibility to the internal fittings. The bar stock frame allows the builder to progress at a rapid pace in the early stages of building the engines.

We recommend that the builder has a lathe of at least 12" swing and a vertical mill with at at least a 36" bed to complete this project.

Specifications:

Scale: 1 1/2" (1/8 scale)        Drivers: 8"
Gauge: 7 1/2" or 7 1/4"   Boiler: 8 5/8"
Bore: 2"   Engine Length: 54"
Stroke: 3 1/4"   Tender: 33"
Valve Gear:  Stevenson   Weight: 474 lbs
      Minimum Radius:  32'

Grid List

Set Descending Direction

1-20 of 22

Page:
  1. 1
  2. 2
  1. MP 7-2 Mogul Erection Drawing Only
    $42.00
    This drawing set includes two sheets, the side and front erection drawings only. Sheet sizes range from 24X36 to 30X50 inches. Learn More
  2. MP 8-39 Mogul Complete Set of Drawings
    $180.00
    This is the complete set of drawings needed to build the 2-6-0 Allen Mogul. A sample sheet thumbnail and a sample drawing detail of the crosshead is shown here. The drawings sheets range in size from 24" X 36" to 30" X 60" for some of the larger erection drawings depending on the locomotive. See below for a complete list of sheets included. Learn More
  3. M100-2 Pair of Waterjet Frames
    $320.00
    This waterjet frame replaces the built up bar stock frame kit for the Mogul. In addition to a great savings in fabrication labor and fastenings, this frame looks more prototypical and has the singular advantage of being able to drop the main axles without having to disassemble the frame. Comes with machining instructions. The hoops at the bottom of the as-waterjet item are to hold the frame's shape while the pedestal guide surfaces are machined. They are cut off and then the pedestal retainers / keepers installed. When not in stock, These frames are produced to order. Please call us at 775-782-3800 or email us at steve@allenmodels.com to place an order for this item. Learn More
  4. Mogul Section 01
    This section includes main frame related parts including the frame stock, frame spreader, draw bar pocket, yoke support and frame extensions. NOTE - M106 yoke support is now cast iron. Learn More
  5. Mogul Section 02A
    This section includes laser cut spring rigging parts for the mogul. Learn More
  6. Mogul Section 02
    This section includes driver and spring rigging related parts for the Allen Mogul. NOTE: M122 Spring Saddle is now cast iron; bronze version still available until sold out. See bottom of list. Learn More
  7. Mogul Section 03
    This section includes the brake rigging for the Mogul. Learn More
  8. Mogul Section 04
    This section includes the main rods and side rods for the Mogul. Learn More
  9. Mogul Section 05
    This section includes the cross heads, yokes and bottom supports. Note that M154-1 has been replaced with a cast iron version; the aluminum version is still available below until inventory sells out. Learn More
  10. Mogul Section 06
    This section includes the cylinder related castings for the Mogul. Learn More
  11. Mogul Section 07
    This section includes the blast pipe, saddle and pilot beam castings. Learn More
  12. Mogul Section 08
    This section includes valve gear eccentrics and related castings. Learn More
  13. Mogul Section 09
    This section includes the pilot truck related castings. Learn More
  14. Mogul Section 09A
    This section includes laser cut parts for the optional swing link lead truck. Learn More
  15. Mogul Section 09B
    This includes the castings for the optional swing link lead truck. Learn More
  16. Mogul Section 10
    This section includes the smokebox and related castings. NOTE - smoke box pieces, door and stack are now cast iron. Learn More
  17. Mogul Section 11
    This section includes the domes, reverse quadrant, cab floor support casting and running boards.. NOTE - dome and quadrant castings are now cast iron, but you may order the bronze castings until they are sold out. Learn More
  18. Mogul Section 12
    This section includes all the castings needed for the tender body. Learn More
  19. M230 30in Laser Cut Tender Kit
    $650.00
    This is a complete laser cut steel tender shell kit for the Allen Mogul and other Allen engines. This kit comes complete with all parts needed to assemble the shell, as well as a bag of 1,000 copper rivets, 12 clecos and a cleco clamping tool. This kit represents hundreds of hours of savings in fabrication time! A "must have" for any new tender builder. This is the "short" 30 inch tender, a "long" 36" tender intended for the ten wheeler and the consolidation is also available. Assembled photo is shown with M229B-1 tank fill hatch and M229A-1A top tank water fill lid. Learn More
  20. Mogul Section 13
    This section includes all the castings needed for the tender trucks. Learn More

Grid List

Set Descending Direction

1-20 of 22

Page:
  1. 1
  2. 2