Ten Wheeler

Ten Wheeler

This freelance engine is based on the Wabash 4-6-0 number 713. It is of the same period as the 2-6-0 Mogul and uses many of the same castings. It has the same construction features as the Mogul but is 5" longer. The tender has been increased by 5" in length as well to balance looks with the engine.

The design is such that an older Mogul could be converted to a ten wheeler without making any major changes to the chassis and running gear. The Mogul boiler is utilized by adding a 5" section of 8 5/8" tubing between it and the smoke box. A new boiler jacket covers the extension.

Specifications:

Scale: 1 1/2" (1/8 scale)        Drivers: 8"
Gauge: 7 1/2" or 7 1/4"   Boiler: 8 5/8"
Bore: 2"   Engine Length: 59"
Stroke: 3 1/4"   Tender: 38"
Valve Gear:  Stevenson   Weight: 500 lbs
      Minimum Radius:  32'

Grid List

Set Descending Direction

19 Item(s)

  1. TP 7-2 Ten Wheeler Erection Drawing Only
    $42.00
    Erection drawings only for the Allen Ten Wheeler. Two large format sheets. Learn More
  2. TP 8-35 Ten Wheeler Complete Drawing Set
    $180.00

    This is the complete set of drawings needed to build the Allen Ten Wheeler.  A sample sheet thumbnail and a sample drawing detail of the crosshead is shown here. The drawings sheets range in size from 24" X 36" to 30" X 60" for some of the larger erection drawings depending on the locomotive. See below for a complete list of sheets included.

    Learn More
  3. T100-2 Pair of Waterjet Frames
    $380.00
    This waterjet frame replaces the built up bar stock frame kit for the Ten Wheeler. In addition to a great savings in fabrication labor and fastenings, this frame looks more prototypical and has the singular advantage of being able to drop the main axles without having to disassemble the frame. Comes with machining instructions. The hoops at the bottom of the as-waterjet item are to hold the frame's shape while the pedestal guide surfaces are machined. They are cut off and then the pedestal retainers / keepers installed. When not in stock, These frames are produced to order. Please call us at 775-782-3800 or email us at steve@allenmodels.com to place an order for this item. Learn More
  4. Ten Wheeler Section 01
    This section includes main frame related parts including the frame stock, frame spreader, draw bar pocket, yoke support, frame extensions and cylinder bars. NOTE - M106 yoke support is now cast iron. Learn More
  5. Ten Wheeler Section 02
    This section includes driver and spring rigging related parts for the Allen Ten Wheeler. NOTE: M122 Spring Saddle is now cast iron; bronze version still available until sold out. See bottom of list. Learn More
  6. Ten Wheeler Section 03
    This section includes the brake rigging for the Ten Wheeler. Learn More
  7. Ten Wheeler Section 04
    This section includes the brake rigging for the Ten Wheeler. Learn More
  8. Ten Wheeler Section 05
    This section includes the cross heads, yokes and bottom supports. Note that M154-1 has been replaced with a cast iron version; the aluminum version is still available below until inventory sells out. Learn More
  9. Ten Wheeler Section 06
    This section includes the cylinder related castings for the Ten Wheeler. Learn More
  10. Ten Wheeler Section 07
    This section includes the blast pipe, saddle and pilot beam castings. Learn More
  11. Ten Wheeler Section 08
    This section includes valve gear eccentrics and related castings. Learn More
  12. ten Wheeler Section 09
    This section includes the pilot truck related castings. Learn More
  13. Ten Wheeler Section 09A
    This section includes laser cut front truck parts for the Ten Wheeler. Learn More
  14. Ten Wheeler Section 10
    This section includes the smokebox and related castings. NOTE - smoke box pieces, door and stack are now cast iron. Learn More
  15. Ten Wheeler Section 11
    This section includes the domes, reverse quadrant, cab floor support casting and running boards.. NOTE - dome and quadrant castings are now cast iron, but you may order the bronze castings until they are sold out. Learn More
  16. ten Wheeler Section 12
    This section includes all the castings needed for the tender body. Learn More
  17. T230 36in Laser Cut Tender Kit
    $700.00
    This is a complete laser cut steel tender shell kit for the Allen consolidation, ten wheeler and other Allen engines if desired. This kit comes complete with all parts needed to assemble the shell, as well as a bag of 1,000 copper rivets, 12 clecos and a cleco clamping tool. This kit represents hundreds of hours of savings in fabrication time! A "must have" for any new tender builder. This is the "long" 36 inch tender, a "short" 30" tender intended for the Mogul is also available. NOTE: Assembled tender shown is 30" tender. Kit shown is 36" tender. Assembled photo is shown with M229B-1 tank fill hatch and M229A-1A top tank water fill lid. Learn More
  18. ten Wheeler Section 13
    This section includes all the castings needed for the tender trucks. Learn More
  19. Ten Wheeler Section 14
    This section includes the throttle, couplers and fire door. Learn More

Grid List

Set Descending Direction

19 Item(s)